This is a the design of microcontroller based electronics project, the use of Reset IC is critical for highly critical applications that need to ensure that the MCU will only operate at its optimum voltage. Without the use of reset circuitry, the MCU may go into a tristate of which it may go into abnormal operation. This is the figure if the circuit;
During power up, once Vcc exceeds the reset threshold, the reset line will be kept low for a period after which the line will be pulled high. This resets the MCU afterwhich it will go into normal operation.
If the Vcc drops below the reset threshold, the reset pin will go low. It will stay low for at least the reset time out period and go back to high again. This operation will ensure that the MCU power supply is monitored and will only go into operation when the Vcc is within the range of its operation. The threshold voltage of the IC is chosen based on the minimum Vcc of the MCU. MCU supply can range from 1.8V to 5.0V and a suitable IC can be chosen to monitor the supply voltage to the MCU.
